Risk Assessment for Farm

The risks that might occur whilst trying to walk to the farm would be being hit by a car or a tram due to busy roads and tramways, Using available crossings when able to. Another risk would be walking onto somebody else's house or property that they don't like. Also some people get sensitive with other people using their area for their own area. Always some people are religious causing them to go to church when they need to, people should be quiet due to respect across churches and other people- respect.



The risks that might occur with the animals is that the animals won't always like having their photos taken, some animals are shy of the camera. Another risk would be that some animals would end up biting you or attacking you with their germs and spit. Some animals do end up attacking you such as horses to grab your attention instead of the other animals.




One of the health risks would be always washing your hands after and before touching the animals due to their dirty germs. You don't know where the animal has been.  The animals might think you have got food instead of making friends with them. Also goats are very furious and angry. They would end up attacking you, this has happened to me and it isn't very pleasant, it hurts. To solve this problem you should stay away from goats as best as you can because they will attack and butt you with their horns.




If the animal doesn't like you then you should step back unless it is a quieter animal. This is to risk hurting or harming yourself or the animal.



For the quieter animals you should turn the flash off. This acquires for all the animals. Some quiet animals like being petted such as guniea pigs but others don't such as some birds. Some animals are very loud causing them to scream the area down of noise. Others prefer the quieter end of the spectrum because they are used to it.





Birds are very loud causing them to be heard over the rest of the animals quite often. The risks for birds is to not poke your fingers through the bars because birds might end up pecking you. Also you should be aware that some birds end up flying in the air, and sometimes escapes due to their ability. Also you should be careful for loose hens because they do charge around the farm trying to chase you.



To avoid this you should  always look on the ground for hens who are always going to be around you, and try to stay calm. No sudden movements. If you do a sudden moment then you should stay still, wait for a  farm assistant to help you. This also risks being chased by a hen or another animal.



Also you should be aware for smaller animals who aren't used to people. Some smaller, quieter animals like being handled but others don't such as baby chickens. Guinea pigs are used to being handled because they are a common household pet who would rather be petted most of the time.
Another key risk is to not be on the phone when you are at the farm or walking to the farm to risk hurting or scaring the animals.


The risks that you might have with the camera and the equipment is that the rain could cause you to spoil the shot. This would affect the ISO,  Apature and the shutter speed. If it does start to rain then you should keep the camera protecting so you don't loose it.


To keep the camera in good conditions for farm trips you should use a wrist hand thing to risk loosing the camera. Also you should try and keep the camera to yourself instead of the animals eating or taking your camera.

Board Game proposal

The box shape and size that I would like to use for my board game is a  rectangle box. I would like to do a rectangle box because I can use my creative skills to create the perfect board game cover for Harry Potter.

 The exact size of the board game that I would like to create is A3 420 mm x A3 297mm. The type of game that I am thinking about creating is a simple board game using my Harry Potter research from the trip that I have been to.


The characters that I would like to use for my main design is some creatures that I have created myself using Photoshop. The place on my board game box that I would put the characters  is spread out across the box. I would  like to have one of my 3 creature characters looking as though it is going into the game because I want to show the Harry Potter theme to the box. The other two characters for my game box would also be going into the game with one looking as though it has just come out of  the game.

The photos that I am going to use for my board game is a pig photo from my Stone Bridge Farm photo, part of a hen, the crown part, part of a horse, duck and sheep.  The type of characters  that I am going to merge together to create a new creature is to use the horses head for the duck to create a kind of horse duck, a horse sheep by using a sheep head merged onto a horse body(a white horse) and the last one is by merging together the hen crown onto the pig body to create a king pig for the game. This could show that my kingpig is one of the good creatures compared to the other creatures that I would like to create.

The type of game that I would like to create is a Monopoly game. This is because I feel as though it would work well as a baord game cover fofr me to create, instead of choosing a different game. Harry Potter to me is a bit like the game of Monopoly with a message inside the game. I would like to create a board game cover that uses its own message to tell the audience what the game is without explaining what the game is.

The problems that I might have with creating my board game cover is timing. Making sure that I have created it on time. Also I might have the problem of not being able to blend and merge the photos together  to create one image because I am not confident  with using Photoshop. Another problem that I might have with creating my box is running out of time which refers to the first problem, because I could distract myself whilst creating the box aswell as bumping into other problems that I haven't mentioned.

Harry Potter merchandise research

The games that are already available are games such as The risk, Cluedo and Monopoly. The target for each of these games is of the age between 3 and up due to the label/sticker at the bottom of the board game cover. This gives it a way a bit because it shows how many people can play the game at once which is important when it comes to playing the game.  

The target audience for this game is ages 9 and up because it clearly says it on the box at the bottom of the board game cover. The target audience is anyone between the ages 9 and adult because of the plus 9 label at the bottom of the box. The game is for 2 to 4 players showing how many at the most should play the game. Children could probably enjoy this game because of the fact that there is a 9 plus age stickers showing this on the box. This game looks very similar to Cluedo because of the way the board has been layed out.  The aim of the game is to find out who, what and where a certain event is happening using different clues. This is a Harry Potter game so it is Harry Potter related. In this case it is the world of magic due to the theme. This game keeps to the theme of Harry Potter of the way the game has been related to Harry Potter. I like the fact that there has been a slogan grabbing the readers attention to play the game. The characteristics of the front page of the cover design is a simple photo/ picture of the 3 key characters of Harry, Hermione  and Ron. Also the front cover uses a catchy slogan to take you into the world of Harry Potter. It makes you feel as though you are physically in the Harry Potter World due to the catchy slogan. I like the Discover the magic because it shows and highlights a secret between the three main characters.  The facial expressions on the board game indicate that something is wrong between the characters, and that they are desperately needing your help.  http://www.geekalerts.com/u/World-of-Harry-Potter-Clue-Game2.jpg

The target audience for this game is any age. It is many aimed for 2-8 players. I know this because of the sticker on the top left corner of the board game giving this information away. It is aimed for ages 8- adult. This game is similar to monopoly because of the double. This is basically monopoly but the designer has made it Harry Potter related. The aim of this game is to go around the board buying different properties and earning the most money throughout the game. The name of the game clearly stands out form the rest of it. It catches my eye because of the fact that it has been spilt between the two parts of the board showing there is a variety to the game. The characteristics of the front cover design is that it shows the two different sides to the Harry Potter world. The good side and the bad side. I like the fact that the board shows the different sides through colour. This shows who is good and who is bad throughout the series due tot he board game. It also shows who is good and who is bad in the board game due to the spilt through the cover. The title has been spilt to indicate the difference between the two sides of characters. The slogan that has been used for the board game shows how catchy it grabs people into playing this simple game. It gives you the feeling that you are inside the game due to the different sides of the game/ the curtain thing in the middle. of the sides.
http://vignette1.wikia.nocookie.net/harrypotter/images/e/e4/HOGWARTS-500x500.jpg/revision/latest?cb=20130602195829

The target audience and the age range that people can play the game is any age. This is because there isn't any sticker showing the ages. There is a PG sticker showing that the game is mainly aimed for ages 8 and up due to the  PG sticker.  This game is a Dvd game aswell as a  card game. The way you play this game is that each player or teams select a token. They then attempt to take the token and move around the board into the winner's circle by answering questions.  A shorter version can be used if needs be. The characteristics of the front cover is that the main character  is trying to grab your attention into playing the game. A bit like direct address with the way they are holding their wand. The other characters are close behind showing that they aren't as important as the main charac ter. Harry in this case.  The slogan on the game of Scene it/the question highlights that the game needs their help. It also shows that a rhetorical question has been used to grab the players attention for them to start playing the game. You can't really see the slogan because it has been sneaked in just in front of Hermione giving the impression that she is trying to hide something  important. It feels as though you are being pulled straight into the game because of the fact that Harry is pointing his wand straight at you showing that he wants you to join him in a magical adventure. The other characters behind the main three show and indicate that there is some sort of maze going on between them that the player has to identity and sort out using their imagination.

http://boardgames.lovetoknow.com/Harry_Potter_Scene_It

The target audience that the game is aimed for is ages 8 to adult, players of 3 to 6 players. This is because of the white label clearly shown on the right hand side of the cover. The board game cover gives the impression that you are in the magical world of Harry Potter. The board game cover is a birds eye view because you can only see the top of the houses. The cover has been made into the staircase of the world of Harry Potter. This has been made by the cover background being turned around slightly to look like the Harry Potter stairs. The aim of the  game is to collect items inside some shops by moving around the board using both dice. The characteristics of the front cover design shows the world of Harry Potter through imagination. The slogan is very eye catching because it grabs the attention of anyone who wants to play this board game.  The dice on the front cover of the board game highlights that the board game has something to do with 3d. This is because of the way that the designer has drawn the dice jumping out of the game. The board game also catches my eye because of the way that the cover has been drawn to grab the designers attention. There isn't any characters on this cover of the board game showing that it is effective with just the background/ the main set or scene.  It feels like the cover is a cartoon style because of the way that it has been drawn. The dice on the cover also gives the shadow effect because of the fact that it has been shown to bounce around the game. This gives the effect of the dice being picked up and bounced around the board.

http://ecx.images-amazon.com/images/I/51HEHBJPJSL.jpg

Secondary Research StoneBridge Farm (Proposal- for the farm)

I have researched some different animals that are at StoneBridge Farm that I coud use for creating my creatures with, to make them more strange and odd.  The animals that I have decided to take photos of is hens, parrots, guinea pigs, birds, sheep and horses.

The animals that I have decided to combine together to create a new creature is a parrot's and rabbit;s  body with a horse or sheep head. This would make the creature very bizarre because of the bird features to the creature. This woud also be a strange creature that I have created because you wouldn't normally mix animals together to create one fantastic creature.

I would like to create a creature using a rabbit head combined with a cow body to make an interesting creature. The things that I will have to consider whilst photographing the animals would be not to have the flash one. If the flash was on then it would scare the animals from having their photo taken.  Animals don't like being photographed with the flash on.

Another problem that I might have whilst trying to take a photo of the animals is the fact that they are contanstly moving away from the camera. It woud be hard to capture the right part of the animal if they are constantly moving around the farm. Not all animals like to be captured by photos they feel as though it hurts them in their opinion.

The farm has an aviary which is a bird type corner filled with lots of pretty birds. I would like to take some photos of some of the birds to use for my creatures because of the pattern that they have on their back, body. This would make my creature very colourful and pretty. Adding different animals to be mashed together sounds very fun and interesting due to thue fact that some of the animals dont fit together.  Rabbits mashed together with a different animal woould work well because Rabbits are cute and fluffy but another animal joined onto the rabbit would make it very interesting as a brand new creature for The Harry Potter Films.
  

The below shows what sort of animals are at Stone Bridge Farm. These photos also give me an idea of what sort of animals I would like to photograph for my 3 creatures/unique research.  Cows would be hard for me to capture because Cows move alot of the time. I don't think that cows particulpar like being photographed because of the way that they turn  away from people.

I feel that the hardest animal to capture/ take photos on would also be goats because they can sometimes buck people. At the farm there are lots of animals to capture photos with includng  ducks and ponies. These are ever growing meaning that they are never running out of animals. I feel like my creatires are going to work well with the different mixes of animals that a rem't normally joined together to create amazing creatures.  Another problem that  I might have with taking photos of the animals is the fact that the hens/chickens might peck people or move from the spot that you would like them to take the photo with.

The ISO that I will use when I come to capture the animals for the project is probably a 200. This is because I don't want to scare the animals that I will be capturing. I might change the settings a bit to a 400 ISO so the images aren't blurry when I come to take them., I don't want to scare the animals but I don't want a blurry image either. The white balance that I will  select is using  rule of thirds because it captures all of the parts to the animal for each of the shots. I will also use rule of thirds because I can capture all of the parts of the animal that I would like to capture for the board game that I would like to create. If I have a high ISO I might scare the animal of taking the photo because animals don't like cameras as much as people. I feel this would be hard to capture using the ISO of 200/40 because the animal might be constantly moving causing me to change the settings to a higher or a lower setting.

The editing techniques that I intend to use is photo shop. This is because this gives the best quality for the photo. I will use exposures and levels to create  the different effects that is used when editing a photo. Levels and exposures would give the photo a more of a creepy feeling if it is black and white because it gives the photo the horror feeling. I would make the photos that I have chosen black and white to show the Harry Potter horror. This would work well with the board game because it shows how much I have thought about the photo/technique before taking it into account.

Harry Potter Research task continued

 2. I have taken a photo of some of the table that was used for the films. I could use this in my for my board game cover because it is about Harry Potter. I like the fact that I have captured the main items on the table. I would use this as a background because it is probably one of my favourite sets that I looked at. I like the fact that a lot of detail has been used for the sets that I could use when I come to create my board game cover. This would be a perfect set to use as a background for my board game cover because the cast have spend 10 years using this set throughout the films. I would also like to use this photo for my board game cover because it is the only set that has been used over the years of the films that would be great for a board game cover.  This set shows the story of Harry Potter throughout the years because he kept coming back to this same set over and over again in all of the films. For a board game this set is great.

3. This is part of the door that I have taken because I like the pattern on it. I could use this for my board game cover because it is to do with Harry Potter. Even though this photo isn't the best that I could have taken it is still a good part of the sets that would be useful to use for my board game cover to make it more of a Harry Potter set. It may just be some a door but the pattern on the door is the best part that I would like to use for my board game cover. I have only got half the door because people were in the way causing me to only take a quick photo which slightly blurred. The golden colour gives the door a more of a magical touch to it. I would use this set for my board game cover because it gives the magic feeling with the colour. I think this part of the door looks pretty with the pattern because it reminds me of the magical staircase. The shadow at the top of the photo gives the feeling that the door is about to fade into the darkness which I like a lot. The shadow also gives the door the Harry Potter feeling of the horrorness and scariness. of some of the films.

4. I have taken a photo of Hogwarts Castle on my trip to the making of Harry Potter. This is a great model that I could use for my board game cover. I would use this for the main background cover because it hows the character of Harry throughout the films, and his life at Hogwarts castle. I like this model because it indicates the detail of how one of the main sets came to life. I also like this model of the Harry Potter films because it highlights the main detail that was used for the making of the films. I feel like I am in the model because of the angle that I have taken the photo. The detail also makes me feel as though I am in the model because of the way that it has been built.  The white colour of the whole model/set gives the impression that it is snowing because of the fact that the model is white/plain. It also shows that it is just a building and not a normal set of Harry Potter.  I have a few photos of this set/.model to show the different angles of the set from different points of view that has been used throughout the films.

5. This is a photo that I have taken on my Harry Potter Film set. I like this set because it uses detail which gives the set the glass touch. The fact that it has been made from glass gives the set the cold feeling. The lighting that has been used in this photo also gives the feeling that you are walking through the set into the light. The lighting that has been used is bright colours to indicate the cold touch/feeling. This set has already influenced me to use it for my board game cover because of the fine detail used to create the whole set. The angle that this photo was taken from is more of a low angle shot. This is because you can clearly see the main glass set. The colours that has been used to create the set straight away gives it the cold/ice feeling from just looking at it.  I would like to use this scene/location for my board game because I think that it would show part of the character of Harry Potter. This set was made purposely in the light to give it the ice feeling. It looks more like a normal ice castle than a Harry Potter set because of the detail on top of the castle, with the turettes.  The angle of the lighting that has been used is very high to show the brightness of the set.  It also gives the touch that something magic is happening inside the castle even when you aren't looking at it.

Harry Potter Research Task

 

 http://www.cinemablend.com/images/news_img/67348/harry_potter_67348.jpg

 1. I have found this strange creature from the Harry Potter Films which I think would work in a board game. It looks as though it doesn't like whoever is staring at it. This is because of the way the creature is looking towards the camera. The pumpkins in the background give the creature more of a scary feeling. This is because pumpkins are scary and I think that the creature in this photo looks scary with the face. The camera has perfectly shot this creature because you can clearly see the background behind the creature. The background gives it a mythical feeling because of the way the path bends round the creature instead of behind the creature. It looks as though this creature is about to squish a pumpkin due to its angriness because of its claws holding the pumpkin as if it is a dog. In my opinion it looks as though this creature has been merged between two birds because of the detailed features on the face. The face of the creatures gives it more of an angry creature instead of a lovely happy creature. The colours used in this shot is a dull colour giving the creature more mystery to it. The lighting that has been used in this shot straight away gives the creature a horror feeling as though something disturbing will happen to the main characters wit the face of the creature. If I was to recreate this creature I would probably use the wing body part. This is because this part looks more mysterious of the body then the rets of it. The pattern and detailed used to create this creature gives it the bird feeling just from the detail of the feathers. The shot that has been used to create this creature/shot would be Rule of thirds because you can see the background, the creature and the foreground of where the creature is and what it is doing. This shot could be a shallow depth of field because the background in the distant is slightly blurred/faded out/ The main subject in this shot is the creature because it is the only thing on the shot has been captured the most clear.

 

https://upload.wikimedia.org/wikipedia/en/7/72/Dobby_dh.jpg

2. This image is of Dobby. The magical creature who is Harry's friend. He is kind of both a creature and a character. He is a creature because of the fact that he doesn't look human with his goblin type ears and body. He is a character because his face looks almost human and Harry likes him as a friend. The type of shot that has been used for this shot would be a close up mainly of Dobby's face. This gives the expression/ mood that Dobby is upset about something because he looks very sad in this sad. It gives the message that he has seen something bad like a ghost or a creature that is after him, because of his very sad face. I think that the shot close up has been used to create the upset feeling in Dobby's face. I think that this is the reaction that the audience is supposed to feel when they watch the films with this shot or character in it. The lighting that ahs been used for this shot is mainly a dark lighting. This shot is very similar to Film Noir with the background. This is because of the dark lighting used for the background behind Dobby. Shadows have been used for this shot causing the horrorness of the shot. I also think that the shot has purposely used shadows to show that the background is supposed to be creepy, dark and horror like. The main focus/key point that you are being drawn to whilst looking at this shot is Dobby's reaction. He is the main focus in the shot that you can't miss  him whilst looking at the shot. It gives the feeling that he is the most important character in this shot compared to other shots. The action that has been captured could have been another creature trying to be very mean to Dobby with his reaction on the face. If I was to recreate this creature I would use his head because that is the most creature like part on him that I think is sweet. I would keep in the face expression because it gives the feeling of what Dobby is inside his skin. This shot could be a mid shot because the camera could be about to go down to Dobby's legs to show the audience what he really looks like behind this shot.

http://thefairytaletraveler.com/wp-content/uploads/2015/09/Fluffy-Harry-Potter-Hell-hound.jpg

3. I have researched and found this creature that has  been used for the Harry Potter Films. I think it looks very scary especially with the triple heads. This is more of a dog creature then a mythical creature because the three heads have the same face just slightly turned on the ends. This shot is probably another close up because you can clearly see the faces heading towards the camera. This is also a birds eye view because it looks as though you are looking down onto the dog creature instead of in front of the dog creature.  The subject matter in this shot would be the three dogged head creature trying to eat one of the characters. This is because of their fanged teeth and facial expression of anger ness.  In this shot you can only see the heads of the dogs showing that it is a birds eye view shot. The lighting that has been used to create this shot would be bright lighting. I think some lamps have been used to create this creature because of the bright background colour. The window on the bottom left of the screen looks as though there is ice on the outside because of the lighting used to create the ice.  The facial expressions used on the dog creature indicates that it isn't very happy with people going past it. It is as though it is a guard stopping people from walking past the creature. I would use the head parts of the creature if I was to recreate the photo because the heads looks more like the creature. I would only use half the head because you can't see the body of the dogs.  The lighting in the  background shows just how angry the dog creature is. The key points of interest is the fact that the three headed dog creature is stopping people from going past them without them looking angry. It looks as though the creature is heading straight towards the camera with the heads ready to jump at the camera people.

 

http://vignette4.wikia.nocookie.net/harrypotter/images/e/ea/Grindylow_HP4.png/revision/latest?cb=20130820024928

4. I have found this creature used in the Harry Potter Films which I think looks strange. It looks like an octopus crossed with  CGI to create the rets of the creature. The shot type that has been used for this shot would be shallow depth of field because the background is blurred. It looks as though the creature is some kind of fish because of the way it is standing in the murky waters. The subject matter in this shot is this creature looking as though it is swimming in the murky waters. If you look closely in the background there is like a blue portal which looks like the way out of the water. I think that this creature is trying to stop Harry from entering the rets of the waters because it has its hands out ready to pounce at Harry. This creature looks a little disturbing in this shot because of the fact that it has no skin which slightly creeps me out. The facial expression used on this creature is kind of angry kind of happy with the way its face is looking. The mouth isn't fully happy but it isn't fully angry or sad either. The mood/emotion that this shot uses is a scary but happy shot because of the creature that doesn't look as scary as some as the others. I think that the key point of interest in this shot is the fact that Harry is in the water trying to get past this creature without it stopping him. I can tell it is an octopus because of the legs that the creature has. It looks like the creature is floating in the water with its legs all tangled round each other. In this shot the creature doesn't look as though it is doing very much because of the way it is standing in the water/floating in the water. This creature has influenced me to use for my  project because it looks like a very unusual creature that wouldn't normally be used in a ordinary film or programme. The part of the creature that I would use is the legs. I would sue the legs because they look very interesting to use in a creature. I would also use the legs to create another creature because of the way the legs are used in this particular shot. 

 This  photo is the creature model  that was used to create this cretaure in the films. It is made from some sort of clay because of the colour that has been used to create this fantastic creature. This is secondary research because I have used somebody elses work to use for my research. I like the way that the hands have been carefully made to fit the creature. The detail used on the model to show the scales have worked well because it gives the creature the fish feeling/look.  The hands on this creature have been created very well because it looks like fins a bit with the hand part gradually going into the fingers.  I have taken this photo when I was on the Harry Potter Trip to get some grreat results of creatures that I could merge together or use part of for my final three creatures. 

http://www.harrymedia.com/data/media/1252/270763_203087779740915_203087386407621_521502_5437866_n.jpg

5. I have found this creature on the internet that I could use for my final creature. This creature is the dying creature that Harry meets when he half dies in the very last film. The shot that has been used for this photo would be a close up. I think that it is also a low- angle shot because it was probably taken from underneath the table that this creature was dying underneath. The subject matter in this shot is when this creatures dies when Harry is in a dream after being half killed by Voldermort. This creature is slightly creepy because of the fact that the blood has been used on the creature to the create this dying creepy creature. The lighting that has been used is a very light lighting because you can see the white background which shows the lighting was bright. I think that lots of lamps were used to create this lighting because of the fact that the lighting is very bright. The mood/emotion that the shot is supposed to show is of a dying creature. It is supposed to make people/the audience feel sorry for the creature that has been killed. I think this because of the facia; expression on the creature. The creature looks slightly disturbed before eventually dying in front of Harry. The key point of interest would be the fact that the creators have captured the blood part of the creature very well. It shows that a different creature or character has shot this creature showing the blood stains.,marks on this creature. If I was to recreate this creature, I would use the leg part of the creature because this is the least creepy part of the creature. This would make a very interesting creature if I use the bottom half of the creature.

  I have taken some photos of the making of the Harry Potter films. I have done this so I can use them in my final project. I have taken a photo of this dragon bird statue to show as a creature that was used as one of the sets of the Harry Potter Films. The statue sort of represents a dragon becauee of the facial expressions of the teeth and mouth. The lighting that is behind the creature on the wall gives it more more of a mystery to it as though something has happened to the statued creature. It looks as though it is about to fly off into the world. The creature/location looks as though it is about to pounce at the camera which is why I like the creature. In my opinion it is also a location because of the fact that this statue is hanging from the ceiling of one of the main sets used for the Harry Potter Films. The shadow at the bottom left makes the statue look as though it is slowly disappearing into the shadow that I like. I think this looks very effective because it shows some horror to the set which is perfect for Harry Potter. I turned my camera round to portrait to capture this creature/set perfectly. I feel like this location is great because it shows some detail to the 

1.

Memory Check x1

1. The Rule of Thirds refers to:

1. A rule that specifies the focal length differential in calculating depth of field.
2. A compositional rule that divides a shot into vertical and horizontal thirds.
3. A compositional rule that refers to certain times of the day for better results.
4. The rule that says your third shot will always be the most stable of three shot in rapid succession

2. In order to maintain consistent exposure, (while all else remains the same), what happens between shutter speed and aperture?

1. As the aperture widens, a slower shutter speed is required.
2. As the aperture widens, a faster shutter speed is required.
3. There is no relation between aperture and shutter speed.
4. None of the above.

3. The best way to reduce camera shake is to:

1. Increase your ISO
2. Decrease your shutter speed
3. Use a tripod
4. Increase (open) your aperture wider.

4. What colour space should images be saved in if their intended output is a web gallery?

1. Adobe RGB
2. ProPhoto RGB
3. sRGB
4. LAB

5. What are the "Golden Hours"?

1. The hours where you can charge the most for your time.
2. The hour before sunrise and after sunset.
3. The hour after sunrise and before sunset
4. The hour when the sun is at its peak

6. When shooting landscapes, the best type of lens to use would be:

1. wide angle lens
2. telephoto lens
3. macro lens
4. supertelephoto lens

7. Depth of field refers to.

1. the range of sharpness from near to far
2. the closest point in the image that is sharp
3. the furthest point of the image that is sharp
4. the background portions of an image that are sharp